22/03/25
Sprint And Safe Boat Supplies: Don't Run Dry in The Waves
To supply quickly and safety the recreational vehicles is one of the main necessities that can introduce themselves to who, above all in the summer period, taking advantage of the long hours of light and the warm temperatures, after months of storage is finally ready to land in the water with your boat, whatever size and type it is, from jet skis and inflatables up to yachts with size up to 24 meters and beyond. Sailing the sea, on the lake or along the rivers does not make any difference; rather, what counts, for those who are preparing to take the helm, is the possibility of having an adequate fuel supply for navigation.
To supply quickly and safety the recreational vehicles is one of the main necessities that can introduce themselves to who, above all in the summer period, taking advantage of the long hours of light and the warm temperatures, after months of storage is finally ready to land in the water with your boat, whatever size and type it is, from jet skis and inflatables up to yachts with size up to 24 meters and beyond. Sailing the sea, on the lake or along the rivers does not make any difference; rather, what counts, for those who are preparing to take the helm, is the possibility of having an adequate fuel supply for navigation.
This is a priority, especially in those places where the regulators are not immediately available or, in any case, in any situation if the need arises, with the aim of not run dry between the waves.
Of course, it is also essential that the fuel transport intended for the boats tanks takes place in a regime of maximum safety, respecting international regulations - ADR, that regulates transports roads of dangerous materials; ADN, focused on inland waterway transport; and IMDG, for maritime transport-and avoid in the meantime any possible risk for itself and other water users.
That is why therefore this task is carried out by fuel transfer tanks. In fact, there are also those designed for people who move on water and need fuel transport to supply recreational vehicles. The transport tanks made by EVERYOUNG, in compliance with international regulations and with marking “UN” are in fact also suitable for nautical sector, thanks to easy handling of these products that have the international approval for the highly flammable fuel transport and that can be equipped with flatbed trailer (as for example, Speedy Tank). These are suitable solutions for the on-site vehicles supply in a fast and reliable way.
EVERYOUNG plastic line composed by multiple models with capacities of 53 litres, 75 litres, 95 litres and 120 litres respectively, which thanks to the compact size and simple movement ensures easy handling and sprint supplies.
Relacionado
22/03/25
Brief analysis of the application of oil transfer pump
The normal applicable temperature of the oil pump is within 250 degrees. If it needs to transport high temperature medium, it can be customized as a high temperature type.
Detalles
22/03/25
The development direction of hot oil pump is small pulsation
In order to improve the performance of hot oil pump and reduce the manufacturing cost, it is required to meet the design requirements of smaller volume, faster response, smaller pulsation and lower noise of hot oil pump.
Detalles
22/03/25
High pressure multistage diesel pump classification
Open or half open in high pressure multistage diesel pump is generally adopts the volute pump body, pump casing in main shaft centerline plane separately, the pump according to the main shaft is installed in the open in different points level and vertical open type two kinds, it is each impeller has a corresponding volute suction chamber and pressure out of the room, which is equivalent to a few single stage volute pump assembly work on the same shaft series.
Detalles
22/02/21
What are the common reasons for the failure of the oil pump
Generally speaking, the mechanical oil transfer pump is very reliable. Even if it fails, it is often the diaphragm rupture that causes insufficient oil transfer. Sometimes the rocker arm or spring of the oil pump is worn out excessively, which will also cause insufficient oil delivery. The fault is easier to identify. The old-fashioned oil pump can be repaired, but the new-style oil pump cannot be disassembled, so it should be replaced once it fails.
Detalles
22/02/21
Analysis of the types of oil transfer pumps
Scope of application of KCB oil transfer pump: It is suitable for conveying lubricating oil or other liquids with similar properties to lubricating oil that do not contain solid particles and fibers, are non-corrosive, have a temperature not higher than 150 °C, and have a viscosity of 5 to 1500 cst.
Detalles
22/02/21
Hot oil pump bearing lubrication
the bearing oil level is too low, so that some parts of the RY hot oil pump bearing can not be lubricated, so the bearing will produce wear and heat, so that the bearing is burnt out.
Detalles
22/02/21
Common faults and countermeasures of electric grease gun
The electric grease gun is a miniature electric grease gun, which consists of a casing, a frame, a plunger pump mechanism, a crank-slider mechanism, a gear reduction mechanism, an oil supply system, an operating system and a power system: its structure is small and the battery is built-in, An external charger can be installed, driven by a DC motor, the price is moderate, labor-saving, fast, easy to operate, high pressure, and can meet the general mechanical oiling requirements.
Detalles
22/02/21
Precautions and maintenance when using electric grease gun daily
Before use, check whether the valve spring, steel ball and other parts are in short supply, the sealing condition of the piston and the oil gun head, and pay attention to check the squeezing effect to ensure the smooth progress of the maintenance work.
Detalles
Suscripción
© 2022 EVERYOUNG | 浙ICP备2021040304号-2 | SEO